downloadAvant Guards Newsavant guards logo
232 Varet Street Brooklyn, NY 11206 • Tel: 718-366-6565 Fax: 718-366-0010 • Email:

Slimline Security Screen Specifications Print this page



The security screen shown on the plans and herein specified is manufactured by Avant Guards. The manufacturer’s name and products have been used to establish the standards of construction and quality of workmanship required for this project. Manufacturers bidding on this project must be actively engaged in the fabrication of specified items for 3 years.


Manufacturers requesting approval to bid their product as equal must submit to the architect shop drawings that include details of attachment to surrounding materials and elevations showing scope of the project.

Quality Assurance

Items provided in the section shall be manufactured and fabricated by firms with 3 years experience in type of work specified. Performance and testing must comply with sag, impact, and forced entry resistance tests of ANSI/SMA 6001-1990, American National Standard. Specifications for Protection Screens must meet the performance requirements for a Heavy Rating.

Delivery, Storage, and Handling

Before and during shipment to site, adequately protect products. Products should be stored in conditions that protect from damage. Installation shall be by installers experienced in type of work specified for respective item.


Verify that openings fit allowable tolerances are plumb, level, provide a solid anchoring surface and comply with approved shop drawings. Plumb and align faces in a single plane and erect screens square and true adequately anchored. After completion of installation, screens shall be in working order and clean.


Manufacturer will supply a written one-year warranty on all products.


American Society for Testing and Materials (ASTM),
American Welding Society (AWS)


Acceptable Manufacturers

Avant Guards Manufacturing
219 Cook Street
Brooklyn, NY 11206
(718)366-6565 fax: (718)366-0010

Simline Security Screen Materials

The mainframe is 1"x 1"x 1/8"aluminum tubing. The corners of the mainframe shall be pneumatically inserted into the frame ends with an interference fit.
The removable interlocking concealment plate extruded aluminum 1/16"thick shall be attached to the mainframe using tamper-resistant stainless steel screws.

A brace is required for guards over 52"high. Scribe angles or channels are optional as per specification.

Infill Options:
12, 14, and 16 gauges perforated panel
18 and 20 gauges stainless perforated panel
10 and 12 mesh stainless


Welding shall comply with requirements of AWS. Grind welds smooth. Window guards, unless otherwise shown, shall cover entire window opening. Provide frame and accessories of size and construction as shown on drawings. Window guards over 5’ wide or 8’ high will be fabricated in two sections.

Paint and Finish

All interior and exterior surfaces of the mainframe and sub frame shall be thoroughly cleaned in a three-step bonderizing process. The surfaces shall receive an electrostatically applied thermoplastic polyester powder coating, which shall be applied and baked to a hard mar-resistant finish in a standard or custom color. Touch-up paint is available for installation.

Locks and Hardware

3 _"x 2 _"F.P. butts brass pin, 2 hinges per guard under 5’, and 3 hinges per guard 5’ and over.

Lock Options:
Lift Quick
Panic Push
Push Down

Installation, Adjusting, and Clean up

Install in accordance with approved shop drawings and specifications. Erect guards and other work of this section, rigid, straight, and plumb with horizontal lines level. Secure connections and attachment. Adjust guards and hardware and leave in working order where applicable. Clean work of this section upon completion. Remove debris resulting from work of this section.


home | profile | cad & specs | contact | request a catalog | options | levels
fixed slimline | top-hinge slimline | slimline | aluminum security | steel security
aluminum detention screen | steel detention screen | steel detention barrier | steel detention barrier door
wire mesh | expanded metal | bar guard


© copyright 2000-2009 Avant Guards, Ltd. © 2000-2009 JDT Technologies and MSteinberg Design